The following data sheet explains how to use the Stack Cutter to trim down stacks of paper.
Step 1: Make sure the cutter is on.
If the cutter is not on, then flip the switch to on and turn the crank so that the movable wall in the cutter comes all the way to the front.
If you turn the cutter on and no lights turn on inside of it, then please ask a DOC employee to get the key for the cutter to turn it back on.
Step 2: Insert paper and line the cut up to the measurements that you need.
Place the paper along the left side and keep it up against the back wall. Keep the paper even by using the Jogger to line up the edges.
Step 3: Close cover and cut paper.
Once the paper is set correctly, close the clear cover and press down on the two pedals to cut the paper.
