The following data sheet explains how to use the Stack Cutter to trim down stacks of paper.
Step 1: Go to the "Home Screen" and select "Crease Mode".
Crease mode will put an indent on your paper which will allow you to fold your paper without it cracking.
Step 2: Crease Mode
Select which type of crease you need for your paper. There are additional crease options when you click on the "More" button in the center of the screen.
Once you have selected a crease method, you will then be prompted to measure the paper you are using.
Place your paper on the tray against the top edge. The bottom edge is adjustable for your size of paper.
Once your paper is set click "Start Measuring", and slide the paper into the machine while keeping it up against the top edge.
After the paper has been measured, hit accept to move to the next screen.
On the "Run Screen", you can begin creasing your paper. Place the paper back on the tray and click "Run". Insert your paper into the machine and you will hear a click when it creases the paper.
The number on the top of the screen will keep track of how many sheets have been creased. It may need to be reset upon you using the creaser.
